Open Access
Issue
E3S Web Conf.
Volume 109, 2019
International Conference Essays of Mining Science and Practice
Article Number 00105
Number of page(s) 9
DOI https://doi.org/10.1051/e3sconf/201910900105
Published online 09 July 2019
  1. Shashenko, O.M., Pustovoitenko, V.P., Sdvyzhkova, O.O. (2016). Geomekhanika: Pidruchnyk dlia VUZiv. Kyiv: Novyi druk [Google Scholar]
  2. Goncharevich, I.F., Frolov, K.V. (1981). Teoriya vibratsionnoy tekhniki I tekhnologii. Moskva: Nauka [Google Scholar]
  3. Pivnyak, G., Samusia, V., Oksen, Y., Radiuk, M. (2014). Parameters optimization of heat pump units in mining enterprises. Progressive Technologies of Coal, Coalbed Methane, and Ores Mining, 19-24 [CrossRef] [Google Scholar]
  4. Revnivtsev, V.I., Denisov, G.A., Zalrogatskiy, L.P., Turkin, V.Y. (1992). Vibratsionnaya desintegratsiya tverdykh materialov. Moskva: Nedra [Google Scholar]
  5. Nadutyy, V.P., Haddad, J., Sukharyev, V.V., Loginova, A.O. (2019). The results of experimental studies of influence of variable parameters on the performance indicators of shock-centrifugal disintegrator. Naukovyi Visnyk Natsionalnoho Hirnychoho Iniversytetu, (1), 42–47 [CrossRef] [Google Scholar]
  6. Dalmatov, B.I. (1988). Mekhanika gruntov, osnovaniya i fundamenty (vkliuchaya spetsialnyy kurs inzhenernoy geologii). Leningrad: Stroyizdat [Google Scholar]
  7. Olovyannyi, A.G. (2012). Mekhanika gornykh porod. Modelirovanie razrusheniy. Sankt-Peterburg: OOO “Izdatelsko-poligraficheskaya kompaniya “Kosta” [Google Scholar]
  8. Nadutyy, V.P., Titov, A.A. (2016). Analiz napriazhennogo sostoyaniya ploskoy zony deformirovaniya vibratsionnykh desintegratorov s uchetom vybrosa materiala. Vibratsiyi v tekhnitsi ta tekhnologiyakh, 3 (83), 54-58 [Google Scholar]
  9. Titov, A.A. (2017). Experimental research of interrelation of mining mass layer porosity and deformation forces on flat surfaces of disintegrators. Geo-Technical Mechanics, 137, 56-64 [Google Scholar]
  10. Babets, D.V., Sdvyzhkova, O.O., Larionov, M.H., Tereshchuk, R.M. (2017). Estimation of rock mass stability based on probability approach and rating systems. Scientific bulletin of National Mining University, (2), 58-64 [Google Scholar]
  11. Sdvyzhkova, O.O., Babets, D.V., Kravchenko, K.V., Smirnov, A.V. (2016). Determining the displacements of rock mass nearby the dismantling chamber under effect of plow longwall. Scientific bulletin of National Mining University, (2), 34-42 [Google Scholar]
  12. Nadutyi, V., Tytov, O., Cheberiachko, I. (2018). Hereditary model of loose mined rock layer deformation in disintegrators. E3S Web of Conferences 60, 00033 (2018). Ukrainian School of Mining Engineering. DOI: 10.1051/e3sconf/20186000033 [CrossRef] [EDP Sciences] [Google Scholar]
  13. Kolosov, D., Dolgov, O., Kolosov, A. (2014). Analytical determination of stress-strain state of rope caused by the transmission of the drive drum traction. Progressive Technologies of Coal, Coalbed Methane, and Ores Mining, 499-504. [CrossRef] [Google Scholar]
  14. Kolosov, D., Dolgov, O., Bilous, O., Kolosov, A. (2015). The stress-strain state of the belt in the operating changes of the burdening conveyor parameters. New Developments in Mining Engineering 2015: Theoretical and Practical Solutions of Mineral Resources Mining, 585-590 [CrossRef] [Google Scholar]
  15. Kolosov, D., Bilous, O., Tantsura, H., Onyshchenko, S. (2018). Stress-strain state of a flat tractive-bearing element of a lifting and transporting machine at operational changes of its parameters. Solid State Phenomena, (277), 188-201. DOI: 10.4028/www.scientific.net/SSP.277.188 [CrossRef] [Google Scholar]
  16. Bondarenko, A.A. (2018). Theoretical bases of pulp suction process in the shallow dredge underwater face. Naukovyi Visnyk Natsionalnoho Hirnychoho Iniversytetu, (3), 22–29. DOI: 10.29202/nvngu/2018-3/4 [CrossRef] [Google Scholar]
  17. Bondarenko, A.A. (2018). Modelling of interaction of inclined surfaces of a hydraulic classifier with a flow of solid particles. Naukovyi Visnyk Natsionalnoho Hirnychoho Iniversytetu, (4), 13–20. DOI: 10.29202/nvngu/2018-4/5 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.