E3S Web Conf.
Volume 109, 2019International Conference Essays of Mining Science and Practice
|Number of page(s)||14|
|Published online||09 July 2019|
Development of the theory of laying a hoisting rope on the drum of a mining hoisting machine
National Technical University “Dnipro Polytechnic”, 49005, Dnipro, Dmytra Yavornytskoho Ave., 19, Ukraine
* Corresponding author: email@example.com
For new designs of mine hoisting machines, the development of scientifically-based solutions to increase the rope capacity and reduce the size of the machines is relevant. Based on the theory of laying the rope on a lined cylindrical drum developed by the authors, it is shown that when choosing a groove profile and winding pitch for a non-lined drum, it is necessary to use a geometric rope laying model, and for taking into account the elastic lining, it is necessary to use a physical model of static interaction of a rope with a scallop of the groove. It is recommended to use the U-tilda-groove profile, which will allow a 4.5 % increase in the drum capacity while maintaining the rope’s curvature radius that is permissible under safety rules during its installation.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.