| Issue |
E3S Web Conf.
Volume 123, 2019
Ukrainian School of Mining Engineering - 2019
|
|
|---|---|---|
| Article Number | 01021 | |
| Number of page(s) | 10 | |
| DOI | https://doi.org/10.1051/e3sconf/201912301021 | |
| Published online | 22 October 2019 | |
Justification of the algorithm for selecting the parameters of the elastic lining of the drums of mine hoisting machines
1 Dnipro University of Technology, Department of Mining Machines and Engineering, 19 Yavornytskoho Ave., 49005 Dnipro, Ukraine
2 Al-Balqa Applied University, Department of Mechanical Engineering, Amman 11134 Jordan 15008
* Corresponding author: mmf@ua.fm
When calculating the stress-strain state of a cylindrical drum of a mine hoisting machine loaded with a metal rope, the stiffness parameters of the elastic lining and frontal surface are taken into account. It is defined that, depending on the values of the radial and bending stiffness of the frontal surface, two zones can be distinguished. If the parameters of the frontal surface fall into the first of them, the stresses in the shell slightly differ from the stresses in the hinged supported shell. The second zone is characterized by a sharp (up to 70%) increase in stresses. An algorithm has been developed for selecting rational parameters of a lined drum, which allows to reduce the stresses in the metal shell by up to 20%.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.