E3S Web Conf.
Volume 110, 2019International Science Conference SPbWOSCE-2018 “Business Technologies for Sustainable Urban Development”
|Number of page(s)||11|
|Section||Energy Efficiency in the Construction|
|Published online||09 August 2019|
Study of polymer adhesion to steel
1 Peter the Great St. Petersburg Polytechnic University, St. Petersburg, 195251, Russia
2 LLC ‘Saint-Petersburg Electrotechnical Company’, Saint-Petersburg, 196603, Russia
3 Pryazovskyi State Technical University, Mariupol, 87500, Ukraine
4 Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
5 Tula state University, 92, Lenina str., Tula, 300012, Russia
* Corresponding author: firstname.lastname@example.org
Tests on the dependence of glues shear strength on: gluing temperature, keeping time before testing, cooling environment, surface roughness, surface conditions, temperature and time of drying on air and in drying oven were carried out to select proper thermoplastics to use as glues for connection of steel elements together. The highest shear strength was showed by the following materials: desmopan 150, antifriction polyamide PA 610-L-DM, impact-resistant glass-filled polyamide. Given results allow significantly expanding scope of application of polymers as gluing compositions.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.