| Issue |
E3S Web Conf.
Volume 110, 2019
International Science Conference SPbWOSCE-2018 “Business Technologies for Sustainable Urban Development”
|
|
|---|---|---|
| Article Number | 01061 | |
| Number of page(s) | 11 | |
| Section | Energy Efficiency in the Construction | |
| DOI | https://doi.org/10.1051/e3sconf/201911001061 | |
| Published online | 09 August 2019 | |
Increase of aggregative and sedimentation stability of slag suspensions by ultrasound
Moscow State University of Civil Engineering, Yaroslavskoye shosse, 26, Moscow, 129337, Russia
* Corresponding author: iv.kozlova@mail.ru
The paper discusses the relevance of the use of metallurgical wastes crushed to a fine state in the production of building materials. Domain granulated slag (DGS) was used as a research object. A method for introducing fine ground slag (FGS) into the cement composition in the form of a slag suspension instead of mixing water has been developed. To establish the uniform distribution of FGS particles in the cement matrix, the behavior of slag particles in an aqueous dispersion medium was previously studied. The optimal parameters of ultrasonic dispersion of slag suspensions are established: the frequency of ultrasonic vibrations is 44 kHz; temperature of dispersion - 25±2°C; dispersion time - 15 min. It has been established that the application of UST to slag suspensions with the observance of optimal dispersion parameters can increase the aggregative and sedimentation stability of the FGS suspension by 2–3 times as compared with mechanical mixing, accelerate the micelle formation process, and enhance the electrostatic factor of aggregative stability.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.