| Issue |
E3S Web Conf.
Volume 110, 2019
International Science Conference SPbWOSCE-2018 “Business Technologies for Sustainable Urban Development”
|
|
|---|---|---|
| Article Number | 01081 | |
| Number of page(s) | 6 | |
| Section | Energy Efficiency in the Construction | |
| DOI | https://doi.org/10.1051/e3sconf/201911001081 | |
| Published online | 09 August 2019 | |
BIM technologies in the inspection of buildings and structures
Moscow State University of Civil Engineering, 129337, 26, Yaroslavskoe Shosse, Moscow, Russia
* Corresponding author: angela-1309.m@yandex.ru Sg6457@mail.ru
The objective of the research is to investigate the issue of the increase in the efficiency of inspection of buildings and structures with the use of BIM technologies and laser scanning with the subsequent creation of information model of the facility at all the stages of its life cycle. Some examples of the executed inspections of buildings and structures are reviewed. The author set the purpose to develop some practical recommendations on the use of BIM technologies during the inspection of buildings, structures and engineering systems. Such recommendations are presented in the article. The results of approbation of the given technique of carrying out inspection of buildings and structures confirmed its efficiency and high precision. The BIM models of buildings, structures and engineering systems, received within the inspection, can be used during all the stages of the facility life cycle. It is especially relevant for the maintenance stage and reconstruction.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.