Issue |
E3S Web Conf.
Volume 110, 2019
International Science Conference SPbWOSCE-2018 “Business Technologies for Sustainable Urban Development”
|
|
---|---|---|
Article Number | 01089 | |
Number of page(s) | 7 | |
Section | Energy Efficiency in the Construction | |
DOI | https://doi.org/10.1051/e3sconf/201911001089 | |
Published online | 09 August 2019 |
Buildings and constructions on the base of timber for the Arctic regions
1 Siberian Federal University, Pr. Svobodny, 82, Krasnoyarsk, 660041, Russia
2 Orenburg State University, Pr. Pobedy, 13, Orenburg 460018 Russia
* Corresponding author: Muller.pp@mail.ru
Economic efficiency of development of high-latitude territories directly depends on the construction technologies applied here. Traditional materials such as reinforced concrete and steel cause unacceptably high resource consumption throughout the entire technological chain of construction production in the Northern regions, and the mechanical transfer of construction technologies to high-latitude construction are ineffective. Analysis of environmental effects on buildings and structures has shown that the most effective for the Extreme North is the dome shape, namely: the building of the lenticular shape; dome building; the building in the form of a sphere; in the form of a cone formed by rotating the Reuleaux triangle around the vertical axis of symmetry; the building of tetrahedron type, and various shapes formed by the combination of buildings of dome shapes. The rationality of constructions made of wood and wood materials is emphasized, which determines the necessity of creating an industry of glued elements. It has been widely used in high-latitude construction and has proved to be the best in terms of frost resistance, low resistance to corrosion from blizzards, high specific strength and low thermal conductivity for a long time.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.