Issue |
E3S Web Conf.
Volume 111, 2019
CLIMA 2019 Congress
|
|
---|---|---|
Article Number | 01011 | |
Number of page(s) | 8 | |
Section | Advanced HVAC&R&S Technology | |
DOI | https://doi.org/10.1051/e3sconf/201911101011 | |
Published online | 13 August 2019 |
Compact ventilation and heat pump with recirculation air for renovation of small apartments
Unit for Energy Efficient Building, University of Innsbruck, Innsbruck, Austria
* Corresponding author: Fabian.Ochs@uibk.ac.at
A new compact and cost effective heating and ventilation concept for decentral renovation of small flats in multifamily houses was developed and investigated in the framework of the Austrian project “SaLüH!” through a dynamic building and HVAC simulation study based on results of laboratory measurements of functional models. The system consists of a façade integrated supply air/exhaust air heat pump equipped with a desuperheater allowing to increase the heating power and to add more freedom to control the system. The simulation results show that such a system is able to improve the thermal comfort of the flat (compared to the standard heating concept without desuperheater) with good indoor air quality and satisfying energy performance. The proposed system - because of its versatility and compactness - represents an ideal solution for decentral renovation of flats in multi-family houses, especially in case of limited space inside the flat and if central solutions are not possible for technical, economic or social reasons.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.