E3S Web Conf.
Volume 111, 2019CLIMA 2019 Congress
|Number of page(s)||8|
|Section||High Energy Performance and Sustainable Buildings|
|Published online||13 August 2019|
Evaluation of the behavior of an innovative thermally activated building system (TABS) with PCM for an efficient design
1 Grupo de Termotecnia, Universidad de Sevilla, Escuela de Ingenieros Camino de los Descubrimientos s/n. 41092, Seville, Spain.
2 Instituto de Ciencias de la Construcción Eduardo Torroja – CSIC, Serrano Galvache 4, 28033, Madrid, Spain.
3 GREiA Research Centre, INSPIRES Research Centre, Universitat de Lleida, Pere de Cabrera s/n, 25001 Lleida, Spain.
4 IECA, Instituto Español del Cemento y sus Aplicaciones, Calle de José Abascal 53, 28003 Madrid, Spain
* Corresponding author: email@example.com
The global energy crisis has caused a double effect. On the one hand, users are increasingly aware of the energy cost they face. On the other hand, public administrations have become aware of the importance of limiting energy consumption in buildings as a way to combat climate change and reduce the energy dependence with the climate. This situation supposes a great opportunity for innovative constructive solutions with an energetic behaviour that surpasses the traditional approach of reduction of the transmittance. In this work, studies are presented to obtain potential of a new solution thermally activated with two innovations with respect to those existing in the market: its activation is done by hot / cold water produced by renewable systems; and its concrete structural element in addition to having coupled the heat exchanger presents an innovative mortar doped with PCM microencapsulated phase change material.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.