Issue |
E3S Web Conf.
Volume 112, 2019
8th International Conference on Thermal Equipment, Renewable Energy and Rural Development (TE-RE-RD 2019)
|
|
---|---|---|
Article Number | 01001 | |
Number of page(s) | 10 | |
Section | Thermal Equipments and Processes | |
DOI | https://doi.org/10.1051/e3sconf/201911201001 | |
Published online | 20 August 2019 |
Waste Heat Recovery for a Diesel Tractor Engine: A Comparison Study
UPB, Dept.of Thermo., Eng., Therm. and Ref. Mach., Spl. Independenţei, nr 313, s.6, Romania
One of the major concerns of nowadays is related to the Waste Heat Recovery (WHR) from the thermal engines, especially regarding the high rating power engines. For Diesel tractor engines, long time operated at high loads, the amount of the saved energy is linked to a significant fuel economy. The proposed study is based on the AMESIM simulation code and performs a comparison between two methods of heat recovery: the one using a supplementary turbine (turbo-compound method) and that using an Organic Rankine Cycle (ORC). The tested engine is an IVECO Cursor 10 Diesel engine type, equipping CASE tractors designed for agricultural activities. The energy savings provided by the engine exhaust gas heat recovery could be further used in supplementing the engine traction, either to be delivered to the auxiliary systems, leading in both cases to a decrease of the fuel consumption.
Key words: Diesel tractor engine / Waste Heat Recovery / Turbo-compound / Organic Rankine Cycle / fuel consumption decrease.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.