E3S Web Conf.
Volume 112, 20198th International Conference on Thermal Equipment, Renewable Energy and Rural Development (TE-RE-RD 2019)
|Number of page(s)||11|
|Section||Thermal Equipments and Processes|
|Published online||20 August 2019|
Experimental research on a hot air generator working on the TLUD principle
Hydraulics and Pneumatics Research Institute INOE 2000-IHP, 040558, Cutitul de Argint 14, Bucharest, Romania
2 National Institute of Research -Development for Machines and Installations Designed to Agriculture and Food Industry -INMA, 71592, 6 Ion Ionescu de la Brad, Blv, Bucharest, Romania
* Corresponding author: email@example.com
The current paper presents the processes of data acquisition and air temperature monitoring in the key points of a hot air generator working on the TLUD principle, which uses temperature sensors, a data acquisition board and an application developed in LabView that numerically and graphically displays temperature variation during burning. The results of the monitoring were obtained on an experimental model, developed by research scientists at INOE 2000-IHP. The data acquired is then used to establish the algorithm for opening the air supply valves for gasification and combustion air, in order to optimize combustion by maintaining the optimum temperature at the funnel.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.