Issue |
E3S Web Conf.
Volume 180, 2020
9th International Conference on Thermal Equipments, Renewable Energy and Rural Development (TE-RE-RD 2020)
|
|
---|---|---|
Article Number | 02014 | |
Number of page(s) | 7 | |
Section | Renewable Energy | |
DOI | https://doi.org/10.1051/e3sconf/202018002014 | |
Published online | 24 July 2020 |
Obtaining thermal energy from renewable sources in rural areas using a combined energy system
1
National R&D Institute for Optoelectronics, Subsidiary Hydraulics and Pneumatics Research Institute INOE 2000-IHP, 040558, Cutitul de Argint 14, Bucharest, Romania
2
SC PROMECO SD SRL, 062382, Drumul Bacriului 16, Bucharest, Romania
3
INMA Bucharest, No 6 Bd Ion Ionescu de la Brad Bucharest, Romania
* Corresponding author: lilianad.ihp@fluidas.ro
The article presents an energy system solution in which the heat energy required to get domestic hot water needed for a family home is obtained by the cumulative conversion of energy from 2 renewable sources: solar energy and biomass energy. Compared to the classic variants of thermal systems, which exploit a single source and provide only partially the energy needed, the combined use consists of energy supply from one source when the other is unavailable or insufficient. In the present case, when the domestic hot water requirement is no longer covered by the solar thermal panels (consumption during the night, days without sun or temporary consumption higher than the usual one), energy from biomass is used in the same system. It is converted to thermal energy using a generator where the gasification module uses the TLUD process. In addition to a higher yield of biomass, this process allows the use of a wide range of biomass types, existing in rural areas. The article presents the results obtained from the experimentation of the system that uses 4 solar panels and a thermal energy generator with a power of approx. 10 kW.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.