E3S Web Conf.
Volume 113, 2019SUPEHR19 SUstainable PolyEnergy generation and HaRvesting Volume 1
|Number of page(s)||2|
|Section||Sustainable Power Plants|
|Published online||21 August 2019|
Dynamic modeling and simulation of a heat pump system for enhancing cycle flexibility
Central Research Institute of Electric Power Industry, Energy Engineering Research Laboratory, 2-6-1 Ngasaka, Yokosuka-shi, Kanagawa 249-0196, Japan
2 University of Genoa, Department of Mechanical Engineering, Thermochemical Power Group, Via Montallegro,1, 16145 Genova, Italy
* Corresponding author: email@example.com
This paper presents a dynamic simulation of a heat pump using butane refrigerant for the purpose of integration with a combined cycle power system and thermal energy storage to enhance flexibility. A dynamic model of a heat pump system is developed using the Amesim software and the simulation result in the case of changing the heat source and heat sink conditions is shown to validate the simulation performance.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.