E3S Web Conf.
Volume 116, 2019International Conference on Advances in Energy Systems and Environmental Engineering (ASEE19)
|Number of page(s)||8|
|Published online||24 September 2019|
Analysis of the power extraction rate change for boreholes in time and in different heat load conditions
Wroclaw University of Science and Technology, Faculty of Environmental Engineering, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland
* Corresponding author: email@example.com
Paper shows the performance analysis of the boreholes being the lower heat source for the brine-to-water heat pump. Researchers focused on the changes of the specific power extraction rate change in time and in various loads. The measurements were the continuation of the analysis of the differences between the Thermal Response Test (TRT) and exploitation data made in 2016/2017 heating season. The heat source performance under greater load and in longer period have been examined. The analysis showed brine temperature drop in overload work conditions even when ambient temperature was high and severe heat source destabilization despite a return to original performance.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.