Issue |
E3S Web Conf.
Volume 116, 2019
International Conference on Advances in Energy Systems and Environmental Engineering (ASEE19)
|
|
---|---|---|
Article Number | 00080 | |
Number of page(s) | 8 | |
DOI | https://doi.org/10.1051/e3sconf/201911600080 | |
Published online | 24 September 2019 |
PLA – based electrospun structures
Wroclaw University of Science and Technology, Faculty of Environmental Engineering, Wybrzeze Wyspianskiego 27, 50-370 Wroclaw, Poland
* Corresponding author: karolina.sobczyk@pwr.edu.pl
Polymer matrix (MATER-BI) electrospinning tests were carried out under various process conditions. Structures with a diversified morphology have been obtained. Changing the parameters of electrospinning process (mainly voltage and solution concentration) resulted in products with different morphology.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.