Issue |
E3S Web Conf.
Volume 116, 2019
International Conference on Advances in Energy Systems and Environmental Engineering (ASEE19)
|
|
---|---|---|
Article Number | 00099 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/201911600099 | |
Published online | 24 September 2019 |
A method of cooling capacity enhancement of ceiling panel
Institute of Environmental Engineering, Poznan University of Technology, Poland
* Corresponding author: janusz.wojtkowiak@put.poznan.pl
The cooling energy demand in the buildings is quite large nowadays and it will increase rapidly in the near future. Therefore, capacity of existing cooling devices must be increased. In this paper surface corrugation as a method of capacity enhancement of ceiling panels is theoretically investigated. A subject of the analysis is the effect of corrugation length L and corrugation angle β on the panel’s cooling capacity. It is shown that in the typical conditions the cooling power of the panel with modified surface can achieve even 153 W/m2 and it is about up to 2.5 times higher than the power of a reference panel with flat surface.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.