Issue |
E3S Web Conf.
Volume 121, 2019
I International Conference “Corrosion in the Oil and Gas Industry”
|
|
---|---|---|
Article Number | 01016 | |
Number of page(s) | 5 | |
Section | Corrosion Monitoring | |
DOI | https://doi.org/10.1051/e3sconf/201912101016 | |
Published online | 14 October 2019 |
Correlation of acoustoelasticity with hydrogen saturation during destruction
1
Peter the Great St. Petersburg Polytechnic University, Saint-Petersburg, Russia
2
Institute for Problems in Mechanical Engineering of RAS, Saint-Petersburg, Russia
* Corresponding author: dmitry.tretyakov93@yandex.ru
The surface effect of acoustic anisotropy in steel and aluminum industrial alloys was experimentally detected. Changes in the integral value of acoustic anisotropy in 10–15 times were observed after removing the surface layer with a thickness of 100 microns in steel specimens and 250 microns in aluminum specimens. The correlation between distributions of acoustic anisotropy and hydrogen concentrations in surface layer of specimens was found. It was suggested that the surface effect of acoustic anisotropy occurs due to the influence of microcrack systems localized in a surface layer of metal. This result can be used to improve existing approaches to estimating of corrosion damage, fatigue, mechanical stresses and plastic deformations of technical structures by using acoustic anisotropy.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.