E3S Web Conf.
Volume 122, 20192019 The 2nd International Conference on Renewable Energy and Environment Engineering (REEE 2019)
|Number of page(s)||7|
|Section||Clean Energy and Energy Engineering|
|Published online||14 October 2019|
Advanced algorithmic model for poly-optimization of biomass fuel production from separate combustible fractions of municipal wastes as a progress in improving energy efficiency of waste utilization
Faculty of Energy and Environmental Engineering, Silesian University of Technology,
2 Faculty of Environmental Engineering, Cracow University of Technology, Cracow, Poland
3 CAD Systems Department, Lviv Polytechnic National University, Lviv, Ukraine
4 Institute of Technology, State University of Applied Sciences in Nowy Sącz, Nowy Sącz, Poland
5 Department of Mathematics, Lviv Polytechnic National University, Lviv, Ukraine
* Corresponding author: firstname.lastname@example.org
Usage of generated fuel components from segregated municipal waste groups in combined combustion processes with traditional fuels results in significant savings by partial replacement of fossil fuels and the reduction of environmental inconvenience that arises directly from the migration of waste to the environment. This article develops technological process of fuel components production which is controlled by advanced embedded SCADA control systems, providing monitoring of process parameters, process visualization and implementation, with the help of logic controllers of freely programmable PLC and complex control algorithms (including adaptive, predictive and inferential control algorithms) by implementation of the polymorphic model of fuel components obtaining process multi-stream optimization.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.