E3S Web Conf.
Volume 124, 2019International Scientific and Technical Conference Smart Energy Systems 2019 (SES-2019)
|Number of page(s)||4|
|Section||Energy Systems and Complexes|
|Published online||25 October 2019|
Principles for reducing the phase shift between instantaneous analogue and discrete signals and the corresponding values in the sampled values (SV) stream of a digital substation
I.N. Ulyanov Chuvash State University, Cheboksary, Russia
* Corresponding author: email@example.com
There are numerous publicly available articles on digital substations, including those dedicated to current and voltage measurements, time synchronization, test systems development, principles of substation design, and other aspects of this topic. But the phase shift between instantaneous signals and the corresponding values in the SV (sampled values) stream has been little discussed. We can list the following principles to reduce the phase shift between instantaneous analogue and discrete signals and the corresponding values in the SV stream. 1) Exclusion from the device, of non-essential elements that introduce additional propagation delays of analogue and discrete signals, provided that such exclusion does not adversely affect the device performance or characteristics. 2) Reduction of the delay time for the other device elements to the minimum values. 3) Adjustment of the delay time of some device elements or addition of special delay elements to equalize the time of signal propagation over analogue and discrete channels. 4) Consideration of the total delay time of signal propagation over analogue and discrete channels and adjustment of the time stamp in the SV frame. The article provides examples of application of these principles in signal generation and measuring devices and phase shift meters.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.