E3S Web Conf.
Volume 124, 2019International Scientific and Technical Conference Smart Energy Systems 2019 (SES-2019)
|Number of page(s)||4|
|Section||Energy Systems and Complexes|
|Published online||25 October 2019|
Improving power quality by calculating voltage losses
Orel State Agrarian University named after N.V. Parakhin, Orel, Russia
2 Kazan State Power Engineering University, Kazan, Russia
* Corresponding author: firstname.lastname@example.org
The problem of improving power quality (PQ) in the integrated power grid of Russia is an urgent task. The article analyzes the number of power consumers’ calls to Kromskiye District Power Networks “Orelenergo”, a branch of the PJSC “IDGC of the Center” for the issue that power quality indices go beyond the standards established in the regulations. The most common complaints of power consumers are low voltage, high voltage, voltage fluctuations. This is primarily due to physical and obsolete depreciation of the main power grid equipment of the power supply organization, disinterest of consumers and the power supply organization in maintaining power quality at the level of regulations, as well as the lack of power supply or-ganization’s software products that allow real-time voltage loss calculations and offer measures to improve the power quality. The presented algorithm, based on calculations of voltage losses, suggests measures to improve the power quality. The application of the proposed algorithm of the program will allow to increase PQ by means of timely determination of voltage losses.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.