E3S Web Conf.
Volume 124, 2019International Scientific and Technical Conference Smart Energy Systems 2019 (SES-2019)
|Number of page(s)||5|
|Section||Energy Systems and Complexes|
|Published online||25 October 2019|
Jet mixing when heating oil and fuel oil in storage tanks
Kazan Scientific Center of the Russian Academy of Sciences, Kazan, Russia
2 Kazan State Power Engineering University, Kazan, Russia
* Corresponding author: email@example.com
This paper presents the research results of jet mixing and heating processes of crude oil of the Zachebashskoe field (Republic of Tatarstan) and fuel oil M100 in a tank with a capacity of 2000 m3. Circulation systems with nozzle inclination in the range from -25° up to 125° are considered. The presence and washing out of bottom sediments in the tank are modeled. The time required for removing the bottom sediments and for heating the tank to the optimum temperature is determined. The best heating for the tank with oil and fuel oil was observed at the nozzle inclination in the range from -25° up to 60°. The optimal nozzle inclination was 115° for washing out the bottom sediments in the oil tank. To remove sediment in a tank with fuel oil it is recommended to use the same nozzle inclinations as for heating.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.