Issue |
E3S Web Conf.
Volume 125, 2019
The 4th International Conference on Energy, Environment, Epidemiology and Information System (ICENIS 2019)
|
|
---|---|---|
Article Number | 13005 | |
Number of page(s) | 7 | |
Section | Energy Conversion Technology | |
DOI | https://doi.org/10.1051/e3sconf/201912513005 | |
Published online | 28 October 2019 |
Plastic Waste Pyrolysis Optimization to Produce Fuel Grade Using Factorial Design
Department of Industrial Engineering, University of Indonesia, Depok 16424, Indonesia
* Corresponding author: farizal@eng.ui.ac.id
Indonesia is one of the biggest plastic waste production in the world. The government targets to reach 20% for recycling plastic waste in 2019. One alternative to manage plastic waste is using pyrolysis to produce fuel. Pyrolysis is used to degrade the plastic long chain of polymer molecules into smaller molecules. All type of plastic except polyvinyl chloride (PVC) were used in this study to produce fuel. For the purpose, experiment factorial design was used for the optimisation plastic type, residence time, and temperature to maximise the yield of liquid products of the pyrolysis process. In this study 2k factorial design was used for each factor. The result shows that the pyrolysis process used is able to produce diesel like fuel in low temperature.
Key words: Plastic Waste / Pyrolysis / DoE / Factorial Design / Fuel
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.