Issue |
E3S Web Conf.
Volume 125, 2019
The 4th International Conference on Energy, Environment, Epidemiology and Information System (ICENIS 2019)
|
|
---|---|---|
Article Number | 14011 | |
Number of page(s) | 4 | |
Section | Renewable Energy | |
DOI | https://doi.org/10.1051/e3sconf/201912514011 | |
Published online | 28 October 2019 |
Production of Fuels From HDPE and LDPE Plastic Waste via Pyrolysis Methods
1 Master Program of Energy, School of Postgraduate Studies, Diponegoro University, Semarang - Indonesia
2 Department of Chemical Engineering, Faculty of Engineering, Diponegoro University, Semarang – Indonesia
3 Department of Industrial Engineering, Faculty of Engineering, Diponegoro University, Semarang – Indonesia
* Corresponding author: enggarheroistoto@student.undip.ac.id
This study to calculate and composition of fuels from polyethylene waste production per litre. Production method with pyrolysis at 450-621°C without catalyst, and quantitative method with GC-MS. The results product of 5 kg pyrolysis HDPE are 3.25 litres of naphtha; 0.85 litre of gasoline; 0.325 litre of diesel fuel; and 18.06 grams of residues. Then The product of 5 kg pyrolysis LDPE are 0.5 litres of naphtha; 2.9 litre of gasoline; 0.1 litre of diesel fuel; and 19 grams of residues. The conclusions in this study were product of 5 kg pyrolysis HDPE are 3.25 litres of naphtha; 0.85 litre of gasoline; 0.325 litre of diesel fuel; and 18.06 grams of residues. Then The product of 5 kg pyrolysis LDPE are 2.9 litre of gasoline, 0.1 litre of diesel fuel, and 19 grams of residues. Composition of fuels from polyethylene (HDPE and LDPE) pyrolysis are naphtha, gasoline, and residues.
Key words: Fuels / HDPE / LDPE / GC-MS / Pyrolysis
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.