Issue |
E3S Web Conf.
Volume 126, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2019)
|
|
---|---|---|
Article Number | 00010 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/201912600010 | |
Published online | 30 October 2019 |
The results of studies of eccentric tillage roller
Ulyanovsk State Agricultural University named after P. A. Stolypin,
Ulyanovsk,
RUSSIA
* Corresponding author: ivanshar2009@yandex.ru
Developed by eccentric tillage rink, which ensures the desired quality of the soil and increase the yield of crops. As a result of theoretical studies, an expression for determining the dynamic force that increases the intensity of crumbling soil lumps, depending on the regime parameters of the rink. In addition, the relationship between the power required when driving the rink, its parameters. The factors influencing the process of tillage by the developed roller are determined. As a criterion of optimization, the adopted coefficient of compliance with for the density soil of benchmark, which characterizes the quality of soil rolling from the position of compliance of soil density with agrotechnical requirements. As a result of experimental studies, the parameters and operating modes of the roller are optimized, at which the required quality of soil treatment is achieved.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.