Issue |
E3S Web Conf.
Volume 126, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2019)
|
|
---|---|---|
Article Number | 00012 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/e3sconf/201912600012 | |
Published online | 30 October 2019 |
Design of a dry inorganic substances dispenser
FSBEI HE Kuban State Agrarian University named after I.T.Trubilin,
Krasnodar,
Russian Federation
* Corresponding author: sergey_belousov_87@mail.ru
The article is devoted to the introduction of dry inorganic substances, mixtures, complex solids on field surface or on the object of treatment by a universal dispenser. The article has a research character which is expressed in the fact that the analysis of methods and means for the introduction of dry inorganic substances as well as extracts from the works of leading scientists on the subject are given, promising scientific developments in the form of patent analysis which provide optimal flow of the technological process are shown, their shortcomings and solutions to these problems are pointed. There was justified the main tendency of development of dispensers and improvement of their designs for advancing the quality rates of their work. Also, there was shown the type of the proposed design, its description and the flow of the technological process. As a result of the work done, there was obtained the design of the dispenser of dry inorganic substances with proposed working elements. The conclusions set out the main results achieved so far.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.