E3S Web Conf.
Volume 126, 2019International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2019)
|Number of page(s)||8|
|Published online||30 October 2019|
Collecting of finely dispersed particles by means of a separator with the arc-shaped elements
Kazan State Power Engineering University,
Krasnoselskaya str., 51
2 Kazan National Research Technological University, 420015, Kazan, Karl Marx str., 68, Russia
* Corresponding author: firstname.lastname@example.org
This paper includes the description of a separator, developed by the authors for the gas flow purification from the finely dispersed particles. The authors also studied the influence of the separator dimensions and the dusty gas flow rate on the degree of its purification from the finely dispersed particles, as well as on the change in the hydraulic resistance of this apparatus. This paper also shows that the main forces that make the greatest contribution to the purification of the gas flow from the finely dispersed particles are centrifugal and inertial. Moreover, the dependencies of the purification efficiency on the Stokes numbers are shown in this paper. The authors studied the change in the hydraulic resistance coefficient of this apparatus from the Reynolds numbers as well.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.