E3S Web Conf.
Volume 135, 2019Innovative Technologies in Environmental Science and Education (ITESE-2019)
|Number of page(s)||7|
|Section||Green Architecture and Sustainable Urban Design|
|Published online||04 December 2019|
Stucco repair method for enclosing brick walls
Don State Technical University, 344000, 1 Gagarin Square, Rostov-on-Don, Russia
2 Astrakhan State University Architectural and Civil Engineering, 414056, 18 Tatishcheva, St., Astrakhan, Russia
* Corresponding author: email@example.com
During the operation of buildings, plaster coatings of the external and internal enclosing surfaces of brick walls are subjected to various destructive influences. Existing methods of repairing plaster coatings do not fully ensure strong adhesion of the material of the repair layer of plaster to the surface of the repaired brick wall structure. In addition, these methods can only get rid of damage but do not improve the operational properties of the plaster layer of the repaired structure. Thus, the urgent problem is the development of an effective method of repairing plaster coatings on the surfaces of brick walls, due to which it will become possible to ensure the monolithic of the repaired plastering structure. In order to address the shortcomings of the existing plaster coating repair techniques on the surfaces of the brick walls and finding ways to improve it, by the authors investigated the possibility and the expediency of performing the repair of additional process steps. A feature of this repair method is the use of preheated plaster mortar, flexible plaster molding, as well as compaction of the stucco mortar in the contact area with the repaired brick wall structure with a deep plate compactor. The test results of samples of plaster coatings manufactured by the proposed method showed the high efficiency and feasibility of using this method for repairs on the external and internal surfaces of walling of brick walls and are mentioned in the patent for the invention of the Russian Federation. The performance characteristics of the plaster are significantly increased as a result of the application of this method, and, consequently, the service life of the plaster coating is increased several times.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.