| Issue |
E3S Web Conf.
Volume 140, 2019
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2019)
|
|
|---|---|---|
| Article Number | 02009 | |
| Number of page(s) | 7 | |
| Section | Development of New Perspective Technological Products | |
| DOI | https://doi.org/10.1051/e3sconf/201914002009 | |
| Published online | 18 December 2019 | |
Metallographic studies results of 20kH13 steel samples with textured relief, modified surface and protective coating
National Research University “Moscow Power Engineering Institute”, Moscow, Russian Federation
* Corresponding author: abt-bkt@mail.ru
One of the possible ways to improve passive methods of the steam turbine blade material protection from water droplet erosion is to create “smart”-surface that combines the properties and characteristics that could not be implemented simultaneously when using one or another proven method of protection. To solve the problem of developing such surface, this article presents the metallographic researches results of the blade steel 20kH13 samples with various already used and promising passive methods of protection, consisting in the use of ion-plasma and polyurethane coatings, surface modification by means of diffusion saturation with nitrogen ions, creation of the structured surface relief by laser ablation. The results of the carried out researches have allowed to reveal both morphology of a possible “smart”-surface, and influence on a microstructure and characteristics of a near-surface layer of samples after treatments considered.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.