Open Access
Issue
E3S Web Conf.
Volume 140, 2019
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2019)
Article Number 02009
Number of page(s) 7
Section Development of New Perspective Technological Products
DOI https://doi.org/10.1051/e3sconf/201914002009
Published online 18 December 2019
  1. M. Ahmad, M. Schatz, M.V. Casey An empirical approach to predict droplet impact erosion in low-pressure stages of steam turbines Wear, 402-403, 57–63 (2018) [Google Scholar]
  2. W. Su, T. Zhou, P. Zhang, H. Zhou, H. Li, Q. Sui Effect of the orientation of laser stripes on the abrasion resistance of biomimetic laser textured surfaces. Optics and Laser Technology, 107, 380-388 (2018) [Google Scholar]
  3. H. Nomoto Solid particle erosion analysis and protection design for steam turbines. Advances in Steam Turbines for Modern Power Plants, 219-239 (2016) [Google Scholar]
  4. A.M. Emelyanenko, F.M. Shagieva, A.G. Domantovsky, L.B. Boinovich Nanosecond laser microand nanotexturing for the design of a superhydrophobic coating robust against long-term contact with water, cavitation, and abrasion. Applied Surface Science, 332, 513–517 (2015) [Google Scholar]
  5. P. Bizi-bandoki, S. Valette, E. Audouard, S. Benayoun Time dependency of the hydrophilicity and hydrophobicity of metallic alloys subjected to femtosecond laser irradiations. Applied surface science, 273, 399–407 (2013) [Google Scholar]
  6. M.-K. Tang, X.-J. Huang, J.-G. Yu, X.-W. Li, Q.-X. Zhang Simple fabrication of large-area corrosion resistant superhydrophobic surface with high mechanical strength property on TiAl-based composite. Journal of Materials Processing Technology, 239, 178–186 (2017) [CrossRef] [Google Scholar]
  7. G. Ilieva Mechanisms of water droplets deposition on turbine blade surfaces and erosion wear effects. Journal of Applied Fluid Mechanics, 10(2), 551-567 (2017) [CrossRef] [Google Scholar]
  8. P. Wieciński, J. Smolik, H. Garbacz, K.J. Kurzydłowski, Erosion resistance of the nanostructured Cr/CrN multilayer coatings on Ti6Al4V alloy. Vacuum, 107, 277–283 (2014) [Google Scholar]
  9. P. A. Mouche, C. Ang, T. Koyanagi, P. Doyle, Y. Katoh Characterization of PVD Cr, CrN, and TiN coatings on SiC. Journal of Nuclear Materials, 527, Article 151781 (2019) [CrossRef] [Google Scholar]
  10. M.A. Khan, M. Duraiselvam, S.S. Panwar, T. Jena, S.R. Dhineshkumar Thermo-mechanical characterization of laser textured LaMgAl11O19/YSZ functionally graded thermal barrier coating. Surface and Coatings Technology, 321, 146-155 (2017) [CrossRef] [Google Scholar]
  11. I. Gulyaev, V. Kuzmin, E. Kornienko, S. Vashchenko, D. Sergachev Microstructure Formation Properties of ZrO2 Coating by Powder, Suspension and Liquid Precursor Plasma Spraying. Materials Today: Proceedings, 11, 430-435 (2019) [CrossRef] [Google Scholar]
  12. F. Ghadami, A.S.R. Aghdam Improvement of high velocity oxy-fuel spray coatings by thermal post-treatments: A critical review. Thin Solid Films, 678, 42-52 (2019) [Google Scholar]
  13. G.T.P. Azar, C. Yelkarasi, M. Ürgen The role of droplets on the cavitation erosion damage of TiN coatings produced with cathodic arc physical vapor deposition. Surface and Coatings Technology, 322, 211-217 (2017) [CrossRef] [Google Scholar]
  14. B. S. Mann, Vivek Arya HVOF coating and surface treatment for enhancing droplet erosion resistance of steam turbine blades. Wear, 254 (7-8), 652-667 (2003) [Google Scholar]
  15. L. Cao, C. Tu, P. Hu, S. Liu Influence of solid particle erosion (SPE) on safety and economy of steam turbines. Applied Thermal Engineering, 150, 552-563 (2019) [Google Scholar]
  16. H. Bagheri Esfe, M. J. Kermani, M. Saffar Avval Effects of surface roughness on deviation angle and performance losses in wet steam turbines. Applied Thermal Engineering, 90, 158-173 (2015) [Google Scholar]
  17. Y. Zhu, J. Xiong, Y. Tang, Y. Zuo EIS study on failure process of two polyurethane composite coatings. Progress in Organic Coatings, 69 (1), 7-11 (2010) [CrossRef] [Google Scholar]
  18. S. Bhargava, M. Kubota, R.D. Lewis, S.G. Advani, A.K. Prasad, J.M. Deitzel Ultraviolet, water, and thermal aging studies of a waterborne polyurethane elastomer-based high reflectivity coating. Progress in Organic Coatings (79), 75-82 (2015) [CrossRef] [Google Scholar]
  19. S. Cakić, G. Nikolić, Č. Lačnjeva, M. Gligorić, M.B. Rajković The thermal degradation of aqueous polyurethanes with catalysts of different selectivity. Progress in Organic Coatings, 60 (2), 112-116 (2007) [CrossRef] [Google Scholar]
  20. A.B. Tkhabisimov, A.F. Mednikov, M.R. Dasaev Laser emitting parameters influence during the formation of a regulated micro nanoscale relief to change the steel surface properties. Natural and Technical Sciences, 2, 274–282 (2018) [Google Scholar]
  21. A.B. Tkhabisimov, A.F. Mednikov, M.R. Dasaev, On nfluence of laser radiation parameters in the formation of ordered micro-nanoscale relief on the change of steel damage properties/. Natural and technical sciences, 12, 274-283 (2018) [Google Scholar]
  22. G. V. Kachalin, A. F. Mednikov, A. B. Tkhabisimov, E. A. Zhukova, State-of-the art, problems and methods to improve erosion resistance of materials used for manufacturing of turbines. Research Journal of Pharmaceutical, Biological and Chemical Sciences, 7(5), 955-63 (2016) [Google Scholar]
  23. Kachalin G V, Mednikov A F, Tkhabisimov A. B. Possibilities of the application of ion-plasma technologies to improve the wear resistance of the functional surfaces of power equipment elements. WIT Transactions on Ecology and the Environment, 186, 729-37 (2014) [CrossRef] [Google Scholar]
  24. Kachalin G.V., Ryzhenkov A.V., Medvedev K.S., Bychkov A.I., Parfenenok M.A. Modern process solutions for formation of ion-plasma coatings on equipment components of the fuel and energy complex/ Nadezhnost i Bezopasnost Energetiki, 2(25), 8-12 (2014) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.