| Issue |
E3S Web Conf.
Volume 140, 2019
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2019)
|
|
|---|---|---|
| Article Number | 10009 | |
| Number of page(s) | 6 | |
| Section | Power Consumption Management | |
| DOI | https://doi.org/10.1051/e3sconf/201914010009 | |
| Published online | 18 December 2019 | |
Numerical modeling of induction heating systems with load of azimuthal periodicity
St. Petersburg Electrotechnical University “LETI”
* Corresponding author: emil-mannanov@mail.ru
The paper presents developed numerical modelling methodology of induction heating problems of disks with a simple and complex profile in 3D for calculating the coupled electromagnetic and thermal tasks in the parametric design language (ANSYS APDL). We demonstrate that the developed tools can be used for products of various sizes, as well as for other metal engineering components using the example of local electromagnetic processing of a metal disk and a diaphragm spring. The authors used development for parametric research and design of induction heaters. The described methodology has particular specificity, due to which it is possible to expand the scope for a number of engineering units with azimuthal periodicity property.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.