Issue |
E3S Web Conf.
Volume 143, 2020
2nd International Symposium on Architecture Research Frontiers and Ecological Environment (ARFEE 2019)
|
|
---|---|---|
Article Number | 02029 | |
Number of page(s) | 5 | |
Section | Environmental Science and Energy Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202014302029 | |
Published online | 24 January 2020 |
Application and performance evaluation of desulfurization wastewater spray drying technology
Huadian electric power research institute Co., LTD., Hangzhou, 310030
* Corresponding author: zssncepu@163.com
In order to realize zero discharge of desulfurization wastewater, spray drying technology of desulfurization wastewater was used in 2x330MW unit of a power plant. Its principle was to use a rotary atomizer for atomization,and a part of hot flue gas was drawn from the SCR denitrification reactor and air preheater into the drying tower, the heat was used to evaporate the desulfurization wastewater in a spray drying tower. The salt in the waste water was mixed with the dust, which was collected and removed by the electric dust remover. Then the water vapor was mixed with the flue gas and finally enters the desulfurization tower.The field test was carried out under the condition that the unit load was 100% and the amount of desulfurization wastewater treated was 5.1m3/h.The results showed that the hot smoke gas volume of drying tower was about 64896m3/h, The smoke temperature at the inlet and outlet of the drying tower were 335℃ and 205℃ respectively,the moisture content of drying products was only 0.05%. The content of HCl in the flue gas at the inlet and outlet of the drying tower were 55mg/L and 195mg/L respectively, the mass fractions of Cl removal and Cl volatilization in desulfurization wastewater were 87.7% and 12.3% respectively. The increase of Cl content in the dried products had little effect on the utilization of fly ash.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.