Issue |
E3S Web Conf.
Volume 143, 2020
2nd International Symposium on Architecture Research Frontiers and Ecological Environment (ARFEE 2019)
|
|
---|---|---|
Article Number | 02055 | |
Number of page(s) | 5 | |
Section | Environmental Science and Energy Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202014302055 | |
Published online | 24 January 2020 |
Design of Multistage Air Cleaning Device for Bus
School of Energy and Power Engineering, Wuhan University of Technology, Wuhan, Hubei, 430063, China
* Corresponding author’s e-mail: 804612350@qq.com
According to the survey, the concentration of pollutants in most buses exceeds the standard seriously, which not only reduces the comfort of passengers, but also harms the health of drivers and passengers. Therefore, it is very important to purify the air in the bus. However, there are many kinds of air pollutants in the bus, and the effect of single purification method is poor. Through the reasonable combination of activated carbon, photocatalyst and negative oxygen ions, the device can absorb and filter organic pollutants, bacteria and viruses in the air. Therefore, the device realizes the treatment of a variety of air pollutants in the bus, effectively improves the air quality in the bus, and also provides a healthy and comfortable travel environment for passengers.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.