| Issue |
E3S Web Conf.
Volume 145, 2020
2019 International Academic Exchange Conference on Science and Technology Innovation (IAECST 2019)
|
|
|---|---|---|
| Article Number | 02020 | |
| Number of page(s) | 5 | |
| Section | International Conference on New Energy Science and Environmental Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202014502020 | |
| Published online | 06 February 2020 | |
Wind tunnel Assessment of Wind Environment and Dust Suppression Effect of Windbreak in Port Bulk Storage Yards
Tianjin Research Institute for Water Transport Engineering, Ministry of Transport of the People's Republic of China, Tianjin, 300456, China
* Corresponding author’s e-mail: 15822850239@163.com
Windbreaks projects are constructed in order to reduce the dusting in port bulk storage yards. The assessment of wind environment and dust suppression effects are important in the planning or preliminary design of such projects. This paper takes a large port bulk storage yard with 853m x 966m area as an example, velocity measurement wind tunnel tests were carried out. The wind velocity reduction ratio and dust suppression rate were used to access the wind environment and the dust suppression effect. The influence of windbreak height was investigated. The comprehensive wind speed reduction rate and dust suppression rate vary with windbreak height nearly linearly. And combined with spraying system, the dust suppression rate can reach beyond 95%, which provides reference and assessment method for relative engineering applications.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.