| Issue |
E3S Web Conf.
Volume 145, 2020
2019 International Academic Exchange Conference on Science and Technology Innovation (IAECST 2019)
|
|
|---|---|---|
| Article Number | 02080 | |
| Number of page(s) | 3 | |
| Section | International Conference on New Energy Science and Environmental Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202014502080 | |
| Published online | 06 February 2020 | |
A Dynamic Analysis of the Rotary Cutting System of King Grass Shredder
Institute of Agricultural Machinery, Chinese Academy of Tropical Agricultural Sciences (CATAS), Zhanjiang 524091, China
* Corresponding author’s e-mail: 1224774128@qq.com
With the rotary cutting system of king grass shredder as the research object, this paper established finite element models for rotating shaft, rotating shaft-belt pulley, rotating shaft-rotary cutting part and rotary cutting system and analyzed the influences of belt pulley and rotary cutting part on the dynamic characteristics of rotary cutting system. The results showed that the belt pulley and rotary cutting part had a great influence on the second order critical speed of rotary cutting system, and the rotary cutting part had a greater influence on the critical speed of first order forward precession than the belt pulley. Meanwhile, the critical speed of rotary cutting system that conformed to facts was calculated. There was a big difference between its first order and second order critical speeds, but the critical speed of first order backward precession was lower. Finally, it was found after analysis that the natural frequency of rotary cutting system was lower than the vibration frequency induced by belt drive, so the shredder can run safely.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.