Issue |
E3S Web Conf.
Volume 157, 2020
Key Trends in Transportation Innovation (KTTI-2019)
|
|
---|---|---|
Article Number | 02024 | |
Number of page(s) | 8 | |
Section | Environmental Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202015702024 | |
Published online | 20 March 2020 |
Geodetic work during implementation of environmental protection measures for the remediation of oil-contaminated lands
Moscow State University of Civil Engineering, 26 Yaroslavskoye Shosse, Moscow, 109377, Russia
* Corresponding author: doptaganka@yandex.ru
At the present level, the production, transportation and primary processing of oil products is associated with the problem of environmental pollution. The ingress of oil products into the natural environment leads to negative consequences and requires the enterprise to incur additional costs to eliminate the emergency situation and to take environmental protection measures to restore oil-contaminated territories. To restore contaminated territories on the basis of field surveys, which are based on geodetic work, remediation projects are developed. Remediation is carried out on the basis of a project, the reliability of which is taken into account during field geodetic work on determining the site area. In the course of the calculations, it was found that the use of tacheometric survey can significantly increase the cost of field work. In most cases, to ensure the development of a remediation project, it is enough to use domestic GPS receivers. The use of this class of devices will reduce both the timing of field work and their cost. It should be borne in mind that the accuracy of domestic GPS receivers allows using them in determining sites with an area of more than 0.5 ha.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.