E3S Web Conf.
Volume 157, 2020Key Trends in Transportation Innovation (KTTI-2019)
|Number of page(s)||9|
|Section||Energy Efficient Building Design|
|Published online||20 March 2020|
Some principles of generating seismic input for calculating structures
Emperor Alexander I St. Petersburg State Transport University, Moskovsky pr., 9, Saint Petersburg, 190031, Russia
* Corresponding author: firstname.lastname@example.org
In this paper different models of seismic input are analyzed. The most essential characteristics of seismic effects are peak ground acceleration, peak ground velocity, peak ground displacement, Arias intensity, cumulative absolute velocity, seismic energy density, harmonic coefficient κ, pseudo spectral kinematic characteristics, root-mean-square peak kinematic characteristics, plastic forces work and damage spectrum. The influence of seismic impulse on characteristics of seismic input is studied. A.A. Dolgaya’s and L.N. Dmitrovskaya’s models with seismic impulse are compared. L.N. Dmitrovskaya’s model allows to reach estimated values of energy characteristics of seismic input with the smallest deviation. When generating such processes, it is important to take into account both the properties of real actions and the limiting state of the calculated structure. The considered models of seismic inputs should be applied in the following cases: a) in case of designing mass construction projects when it is not possible to get a package of design accelerograms, b) in typical designing when the design object can be located on sites with different seismic and geological conditions, c) at early stages of designing important objects when the package of design accelerograms is not available yet but it is necessary to make technical solutions.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.