| Issue |
E3S Web Conf.
Volume 161, 2020
International Conference on Efficient Production and Processing (ICEPP-2020)
|
|
|---|---|---|
| Article Number | 01078 | |
| Number of page(s) | 3 | |
| DOI | https://doi.org/10.1051/e3sconf/202016101078 | |
| Published online | 15 April 2020 | |
Study of the Designed Washing Machine for Canning Industry
Associate Professor, Mari State University, Yoshkar-Ola, Russia
* Corresponding author: ao_maiorov@mail.ru
Nowadays industry uses special washing machines to wash the outer surface of cans, which can be jet, submersible and combined-type. These washing machines are quite energy-intensive and metal-consuming. A washing machine was designed in Mari State University, in which the objects cleaned gain eccentric motion and bubbling is created from the side of cylindrical cans. In order to identify the dependence of the cleaning quality on liquid activation using the air bubbling method, a number of factor-at-a-time experiments with a three-fold repeatability were performed at the outside of the washed objects. Special theoretical calculations were carried out to identify the limits of the drive wheel speed values aimed at studying kinematic parameters. The type of hyperbolic dependence of the wheel diameter on its rotation frequency is also determined.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.