Issue |
E3S Web Conf.
Volume 161, 2020
International Conference on Efficient Production and Processing (ICEPP-2020)
|
|
---|---|---|
Article Number | 01079 | |
Number of page(s) | 4 | |
DOI | https://doi.org/10.1051/e3sconf/202016101079 | |
Published online | 15 April 2020 |
Determination of the Optimal Parameters of the Metal Can Washing Machine
Associate Professor, Mari State University, Yoshkar-Ola, Russia
* Corresponding author: ao_maiorov@mail.ru
This article reflects the results of experimental studies on determining the can surface cleaning quality. Two-stage washing of can surfaces was performed based on the results of the factor-at-a-time experiments. It furnished a number of dependences of cleaning quality on the detergent concentration at different washing solution temperatures, as well as on the washing solution temperature at various solution concentrations at fixed washing machine drive wheel rotation frequency. Based on the findings of the studies carried out, it was proved that the cleaning quality indicators increase sharply when the washing solution concentration ranges between 1 and 3 g/L. The optimum temperature providing high-quality cleaning of the can surface as per the standard ranges between 65 and 85°C, and the optimal rotation frequency of the washing machine drive wheel is 20-35 min-1.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.