Issue |
E3S Web Conf.
Volume 164, 2020
Topical Problems of Green Architecture, Civil and Environmental Engineering 2019 (TPACEE 2019)
|
|
---|---|---|
Article Number | 02008 | |
Number of page(s) | 7 | |
Section | Energy Efficiency in Building Construction | |
DOI | https://doi.org/10.1051/e3sconf/202016402008 | |
Published online | 05 May 2020 |
Influence of detailing the climate model on the calculation of energy consumption
Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
* Corresponding author: kryuchkovaou@mgsu.ru
The repeatability of outdoor air temperature and enthalpy combinations in a construction area is a necessary initial information for calculating the energy consumption of air conditioning systems. The most convenient form of presenting climatic data in such calculations is the probabilistic-statistical model, which constitutes a Table, the cells of which show the probabilistic repeatability of the outdoor air temperature and relative humidity. The parameter values given on the vertical and horizontal scales, that form the cell boundaries, can be taken with larger or smaller increments. The paper that served as the basis for this article, provides verification of the initial climatic model detailing experimentally under full-scale conditions in the city of Hanoi (Vietnam). The criterion for the appropriate model detailing was the deviation of the energy consumption estimates of the room cooling system, got experimentally and by calculation. Moreover, the calculations were performed not only on two climate probabilistic and statistical models, but also on the data of direct measurements of the outdoor air temperature and relative humidity with an accuracy of 0.1 for temperature and up to 2 % for relative humidity.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.