| Issue |
E3S Web Conf.
Volume 164, 2020
Topical Problems of Green Architecture, Civil and Environmental Engineering 2019 (TPACEE 2019)
|
|
|---|---|---|
| Article Number | 08024 | |
| Number of page(s) | 10 | |
| Section | Sustainable Construction Materials and Technologies | |
| DOI | https://doi.org/10.1051/e3sconf/202016408024 | |
| Published online | 05 May 2020 | |
Application of 4D BIM modelling in planning and construction of zero cycle works
Saint Petersburg State University of Architecture and Civil Engineering, Saint Petersburg, Russia
* Corresponding author: v.konyushkov@yandex.ru
4D BIM modeling is a unique and effective management technology in construction projects. However, it is not widely used in geotechnical construction. This paper summarizes main aspects that characterize the essence of this new technology. An extensive literature review and analysis of ‘pilot’ projects were conducted. The main 4D modeling tools are presented. As a result of the study of ongoing projects, a calculation of the economic efficiency by implementation of this technology was made. The use of this method in planning and construction can increase the main criteria for assessing the success and effectiveness of zero-cycle work.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.