Issue |
E3S Web Conf.
Volume 165, 2020
2020 2nd International Conference on Civil Architecture and Energy Science (CAES 2020)
|
|
---|---|---|
Article Number | 05013 | |
Number of page(s) | 4 | |
Section | Chemical Engineering and Materials Science | |
DOI | https://doi.org/10.1051/e3sconf/202016505013 | |
Published online | 01 May 2020 |
Research on Decorative and Integrated Thermal Insulation Board for External Wall
1 Shandong Quality Inspection and Testing Center of Construction Engineering Co., Ltd, Tianqiao District, Jinan City, Shandong Province, China
2 Heze Municipal Engineering design Institute, Mudan District, Heze City, Shandong Province, China
3 The Second Construction Limited Company of China Construction eighth engineering, DivisionLixia, District, Jinan City, Shandong Province, China
a546658230@qq.com, b582407607@qq.com
With the acceleration of globalization, industrialization and informatization, the consumption of energy resources is increasing, and the building energy consumption accounts for about 30%, so the building energy conservation has become an important part of energy conservation and emission reduction. At the same time of economic development, we should reduce building energy consumption and do a good job in building energy conservation [1], and put forward the following ways: the improvement of building’s own heat preservation and insulation performance; the improvement of energy utilization system efficiency such as electricity and heating; the development and utilization of new energy; and the proper management of energy utilization equipment system. Among them, the most effective way is to improve the thermal insulation performance of the building itself. The thermal insulation of enclosure and the air tightness of doors and windows are two important parts of thermal insulation. According to the relevant data [2], the heat loss of enclosure structure accounts for 40-50% of the building energy consumption, and the heat loss of wall structure accounts for about 70%. Therefore, the improvement of the thermal insulation requirements of the wall structure plays a huge role in building energy conservation
In this paper, the experimental research on the exterior wall thermal insulation board of decoration and heat preservation integration is carried out. The influence of fly ash content, asbestos fiber content, composite active activator, waterproof agent and other additives on the physical properties of fiber-reinforced fly ash / cement board is discussed. The optimal content of various factors is determined and its mechanism is analyzed. The optimum proportion of fiber reinforced fly ash / cement board was determined by orthogonal test.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.