Issue |
E3S Web Conf.
Volume 167, 2020
2020 11th International Conference on Environmental Science and Development (ICESD 2020)
|
|
---|---|---|
Article Number | 05002 | |
Number of page(s) | 6 | |
Section | Renewable Energy | |
DOI | https://doi.org/10.1051/e3sconf/202016705002 | |
Published online | 24 April 2020 |
The influence of climatic conditions on the efficiency of the solar system
University Centre for Energy Efficient Buildings, Czech Technical University in Prague, Trinecka 1024, 273 43 Bustehrad, Czech Republic
The simulation analysis of the solar hot water preparation system for an apartment building is presented. The analyses investigated the effect of climatic conditions on the efficiency of the solar system. To demonstrate the influence of climatic conditions, four building locations (Stockholm, Prague, Milan, and Barcelona), six different solar collectors, and six different design areas of solar collector field were used. The aim was to verify how the efficiency of the solar system varies depending on the climatic and design conditions. Moreover, the influence of year-to-year fluctuations of climatic conditions was also explored. The analysis has been provided by using TRNSYS simulation software over the period of one year using the time step of 2 minutes. The simulation results clearly showed that the efficiency of the SDHW system is dependent on the climatic conditions, especially on the air temperature. On the other hand, year-to-year weather fluctuations do not strongly affect the efficiency of the SDHW system.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.