| Issue |
E3S Web Conf.
Volume 172, 2020
12th Nordic Symposium on Building Physics (NSB 2020)
|
|
|---|---|---|
| Article Number | 01001 | |
| Number of page(s) | 9 | |
| Section | Interior insulation | |
| DOI | https://doi.org/10.1051/e3sconf/202017201001 | |
| Published online | 30 June 2020 | |
Moisture performance of a new thermal insulation composite for interior application
Technical University of Denmark, Department of Civil Engineering, 2800 Kgs. Lyngby, Denmark
* Corresponding author: car@byg.dtu.dk
The paper introduces prototypes of a new composite insulation product for interior application. The product consists of a standard mineral fibre insulation batt, which is wrapped in a combination of a thin fabric of moisture absorbing, capillary active material and vapour retarding membranes. The insulation composite has been tested with small samples in a laboratory setup and in an outdoor field test on a full-scale brick wall, and has so far shown promising results in comparison with other products. The paper describes the new insulation composite and the initial moisture tests that have been made with its constituents as well as results from the laboratory and field tests of its ability to prevent moisture accumulation.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.