E3S Web of Conferences

Open Access

About the conference

Published online: 30 June 2020

PDF (1.46 MB)

Open Access

Statement of Peer review

Published online: 30 June 2020

PDF (279 KB)

Louise Rævdal Lund Christensen, Thea Hauge Broholt, Michael Dahl Knudsen, Rasmus Elbæk Hedegaard and Steffen Petersen

Martina Guasco, Martina Orlanno, Chiara Piccardo, Andrea Giachetta and Ambrose Dodoo

Mikael Salonvaara, Philip Boudreaux, Andre Desjarlais, Florian Antretter and Eric Werling

Published online: 30 June 2020

DOI: https://doi.org/10.1051/e3sconf/202017204010

Open Access

A new tool for the drying time and the moisture risk estimation in concrete floors 04011

Pauli Sekki, Pasi Marttila and Tarja Merikallio

Ari-Veikko Kettunen

Ferdinand Sigg and Harald Krause

Kazuma Fukui, Chiemi Iba, Madoka Taniguchi, Kouichi Takahashi and Daisuke Ogura

Ligia Moga and Ioan Moga

Xiuzhang FU and Mingzhu HAN

Jens-Lüder Herms

Matthias Winkler, Bettina Steuri, Sebastian Stalder and Florian Antretter

Dirk Weiß, Katja Tribulowski, Stephan Hirth and Heiko Fechner

Published online: 30 June 2020

DOI: https://doi.org/10.1051/e3sconf/202017212012

NERO H2020 wooden NZEB

Open Access

Kouvola Housing fair NZEB houses energy, cost and carbon analyses 13001

Kaiser Ahmed, Hatef Hajian, Tero Hasu and Jarek Kurnitski

Published online: 30 June 2020

DOI: https://doi.org/10.1051/e3sconf/202017213001

Open Access

Cost reduction of the new NZEB Wooden building – case study of the kindergarten in Estonia 13002

Endrik Arumägi and Targo Kalamees

Jan Fořt, Petr Hotěk, Martin Mildner, Jitka Krejsová and Robert Černý

Yan Ma, Yonghui Li, Shuichi Hokoi and Xiaogu Zhang

Jevgeni Fadejev, Raimo Simson, Jyrki Kesti and Jarek Kurnitski

Folke Björk, Bror Sederholm, Jan Trägårdh and Bo Olofsson

Bozena Dorota Hrynyszyn and Zhiyong Tian

Birger E. Wasenius

Michiel Vanpachtenbeke, Jan Van den Bulcke, Joris Van Acker and Staf Roels

Erlend Andenæs, Vegard A. Skagseth, Nora S. Bunkholt, Tore Kvande and Jardar Lohne

Lana Migla, Andrejs Snegirjovs and Olga Shutenkova

Yonghui Li, Weilun Zhang, Ruobin Wu, Xinyuan Dang and Shuichi Hokoi

Serik Tokbolat, Yelaman Naizabekov and Stefano Mariani

Stephen Burke, Pär Carling, Henrik Davidsson, Kristin Davidsson, Tomas Ekström, Lars-Erik Harderup, Johnny Kronvall, Per Sahlin, Rikard Sundling and Magnus Wiktorsson

Published online: 30 June 2020

DOI: https://doi.org/10.1051/e3sconf/202017225011

E3S Web of Conferences

Volume 172 (2020)

12th Nordic Symposium on Building Physics (NSB 2020)

About the conference

Statement of Peer review

Interior insulation

Moisture performance of a new thermal insulation composite for interior application 01001

Evaluation of the risk of decay of wooden beams embedded in internally insulated walls by long-term measurements 01002

Internal insulation of solid masonry walls – field experiment with Phenolic foam and lime-cork based insulating plaster 01003

Guidelines for internal Insulation of historic Buildings 01004

Moisture in walls before and after internal wall insulation: a long-term in-situ dataset 01005

Internal wall insulation with a new aerogel panel: SLENTITE® for energetic retrofit in historic buildings 01006

Towards the evaluation of a thermal compartmentation renovation concept through in-situ measurements 01007

Measurements behind Internal Insulation on Solid Masonry Walls with Different Orientations and Degrees of Repair in a Danish Multi-story Building 01008

Hygro-thermal performance of wooden beam ends: experimental investigations of uninsulated and internally insulated brick wall 01009

Climate change and buildings

Energy and indoor thermal comfort performance of a Swedish residential building under future climate change conditions 02001

Resilience of Canadian homes and small buildings to the effects of climate change - Risk of deterioration due to condensation within wall assemblies 02002

Cooling of schools – results from a demonstration project using adiabatic evaporative cooling with harvested rainwater 02003

Overheating risk of a single-family detached house built at different ages under current and future climate in Canada 02004

The effect of seasonal weather changes on the performance of databased models of the thermodynamic behaviour of buildings 02005

The Impact of Climate Change on Material Degradation Criteria in Heritage over Iran: Regional Climate Model Evaluation 02006

Overheating risk of a typical Norwegian residential building retrofitted to higher energy standards under future climate conditions 02007

Impact assessment of climate change on the energy performance of the building stocks in four European cities 02008

Managing climate-change-induced overheating in non-residential buildings 02009

The influence of unmeasured occupancy disturbances on the performance of black-box thermal building models 02010

Cooling and overheating

Design of smart wetting of building materials as evaporative cooling measure for improving the urban climate during heat waves 03001

Use of a radiator for user-centric cooling – Measurement and Simulation 03002

Possibilities of combining radiant wall cooling with ejector cooling cycle powered by Fresnel solar collectors 03003

Thermal mass and the effects on heating and cooling demands – an experimental study of an exposed concrete floor 03004

Investigating overheating by measurement and simulation in classrooms 03005

NIR reflective pigments to mitigate the urban heat islands effect (UHIE) 03006

Validation of Models for the Calculation of Sun Positions and mapped Radiation on inclined Surfaces 03007

Computational fluid dynamics analysis in the ductless whole-house air conditioning system 03008

Lightweight timber-framed wall and impact of ventilated cladding on the possibility of reducing summer overheating in Central Europe 03009

Design optimization of a building attached sunspace through experimental monitoring and dynamic modelling 03010

Moisture modelling

Using convolutional neural networks for hygrothermal predictions to extrapolate to other external climates 04001

The use of POD–DEIM model order reduction for the simulation of nonlinear hygrothermal problems 04002

Testing of a new non-equilibrium heat and moisture transfer model in porous building materials 04003

Pore scale modelling of moisture transfer in building materials with the phase field method 04004

Water vapor transport to a semi-infinite material with simultaneous varying surface relative humidity and temperature 04005

Sensitivity and Uncertainty analyses on a DELPHIN model: the impact of material properties on moisture in a solid brick wall 04006

Efficient hygrothermal wall transport models inside simulations of conditioned buildings 04007

Modelling the moisture redistribution in concrete floors with screed and flooring material with varying properties 04008

Analytical solutions of water suction and drying processes vs. experiments 04009

Validation of Hygrothermal Simulations with Wall Performance Experiments in an Environmental Chamber 04010

A new tool for the drying time and the moisture risk estimation in concrete floors 04011

Air leakage

Pressure difference in buildings with good air-tightness: control measurements after IAQ renovations 05001

Influence of Building Envelope Type on the Minimum Mechanical Ventilation Rate to Achieve a Positive Indoor Air Pressure 05002

Use of radon barriers to reach an acceptable radon level 05003

The Impact of Infiltration on Heating Systems Dimensioning in Estonian Climate 05004

A prospective Study on the Evolution of Airtightness in 41 low energy Dwellings 05005

Assessment of wind impact on building air leakage measurements using a model scale experiment 05006

Overview of large building testing in Baltic countries 05007

Influence of airtightness of steel sandwich panel joints on heat losses 05008

Development of air tightness prediction method of masonry walls 05009

Air leakage paths in buildings: Typical locations and implications for the air change rate 05010

Changes to structural solutions and their effect on radon functionality on the structures base on the ground 05011

Indoor climate

Thermal comfort, thermal sensation and skin temperature measurements using demand-controlled ventilation for individual cooling 06001

Effect of moisture buffering on surface temperature variation: study of different indoor cladding materials 06002

Cold windows induced airflow effects on the thermal environment for a large single-zone building 06003

Thermal comfort: standard compliant modelling of natural ventilation in adaptive time step solvers 06004

Field measurements and CFD simulation of a room in an elderly care center in Lithuania to evaluate air quality and thermal comfort 06005

Clothing behaviour in Belgian homes 06006

Early-stage concentrations of formaldehydes and TVOCs in a new low-energy building 06007

Internal particulate matter pollution in educational building 06008

The Human Comfort Level in an Energy-Saving Simulation Model of Office Building 06009

The ambivalence of personal control over indoor climate – how much personal control is adequate? 06010

Occupant comfort in Nearly Zero Energy Buildings (nZEB) by using the building structure for demand side management (DMS) 06011

Moisture performance of structures

Sensitivity of the hygrothermal behaviour of homogeneous masonry constructions: from Sobol indices to decision trees 07001

Hygrothermal performance of timber frame walls with brick veneer cladding: a parameter analysis 07002

Hygrothermal Behaviour of Ventilation Cavities in Highly Insulated Envelopes 07003

Highly insulated crawl spaces with controlled minimal ventilation – proof of concept by field measurements 07004

Hydrothermal performance of the external wooded frame wall structure reinforced with ballistic panels 07005

Influence of the lateral source/building separation on vapour intrusion: A numerical study 07006

12^th Nordic Symposium on Building Physics (NSB 2020)

Internal wall insulation with a new aerogel panel: SLENTITE^® for energetic retrofit in historic buildings 01006