E3S Web Conf.
Volume 174, 2020Vth International Innovative Mining Symposium
|Number of page(s)||7|
|Section||Innovations in Mining Machinery|
|Published online||18 June 2020|
Analysis of Compliance with the Requirements for Geohod Actuating device Circuit Design for Soft Rocks Destruction
1 Institute of Coal of the Federal Research Center Coal and Coal Chemistry Siberian Branch of the RAS, 650610 Leningradsky av. 10, Kemerovo, Russia
2 Research Center “Siberian NPO”, 650000 Sovetsky av., 56, Kemerovo, Russia
3 T.F. Gorbachev Kuzbass State Technical University, 650000 Vesennya st. 28, Kemerovo, Russia
∗ Corresponding author: email@example.com
The article presents an analysis of circuit decisions of the actuating device of the geohod for the destruction of soft rocks for compliance with the requirements for them. To set the relevant goals and objectives of the study, the features of the work of a new class of mining machines (geohods) and the main provisions of geohod technology are presented. As a result of the study by the method of multicriteria analysis, it was found that the knife actuating device of the geohod meets the most complete requirements for the actuating device of the geohod. Requirements and options for circuit design for knife actuating device of geohods have been developed. To analyze the previously developed circuit design of the knife actuating device of the geohod, the method of multi-criteria analysis of decision making was chosen. Because of the analysis, four options for circuit design of knife actuating device of geohods were reasonably selected. The tasks for further research are formulated.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.