| Issue |
E3S Web Conf.
Volume 175, 2020
XIII International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness – INTERAGROMASH 2020”
|
|
|---|---|---|
| Article Number | 05010 | |
| Number of page(s) | 6 | |
| Section | Agricultural Machinery | |
| DOI | https://doi.org/10.1051/e3sconf/202017505010 | |
| Published online | 29 June 2020 | |
The effect of nano-additives on the processes of electrodeposition of nickel precipitation
Don State Technical University, 1, Gagarin square, 344003, Rostov-on-Don, Russia
* Corresponding author: degtyar@yandex.ru
The article presents the results of investigates of the effect of ultrafine additives (zirconium diboride, silicon carbide, diamond) on the physical and mechanical properties of composite electrochemical nickel deposits obtained from colloid-electrolyte baths. It was revealed that the most effective nanostructured additives are zirconium diboride and ultrafine diamond. Current efficiency and potentiostatic researches shew mutual participation of finely dispersed nickel hydroxide compounds in the formation of a composite electrochemical deposits and dispersed phase of zirconium diboride or ultrafine diamond that are attendant in the solution or formed during electrolysis and introduced into the electrolyte. It is shown that the optimal values of internal tensions and microhardness are associated with the hardening of the nickel matrix together with various nano-dispersed additives that are included in the deposit. These deposits can be used as an alternative to chrome deposits on parts of machinery.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.