| Issue |
E3S Web Conf.
Volume 175, 2020
XIII International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness – INTERAGROMASH 2020”
|
|
|---|---|---|
| Article Number | 05022 | |
| Number of page(s) | 8 | |
| Section | Agricultural Machinery | |
| DOI | https://doi.org/10.1051/e3sconf/202017505022 | |
| Published online | 29 June 2020 | |
Modeling of long length and complex shaped chain and planed conveyor noise forming
Don State Technical University, 1, Gagarin sq., 344003, Rostov-on-Don, Russia
* Corresponding author: mbalinskaya91@gmail.com
The article presents an analysis of the chain-slat conveyor in terms of noise generation. It is shown that, due to the volumetric layout and long length, it is one of the main sources of noise generation. Based on these studies, a theoretical model of its noise generation is developed. The model has been tested experimentally. The coincidence of the calculation of the results and experimental data is quite acceptable. This gives reason to talk about the possibility of using the model for calculating the noise of the conveyor of other schemes.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.