Open Access
Issue
E3S Web Conf.
Volume 175, 2020
XIII International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness – INTERAGROMASH 2020”
Article Number 11024
Number of page(s) 7
Section Agricultural Structures
DOI https://doi.org/10.1051/e3sconf/202017511024
Published online 29 June 2020
  1. V.N. Nerella, V. Mechtcherine, 3D Concrete Printing Technology, 333–347 (2019) https://doi.org/10.1016/b978-0-12-815481-6.00016-6 [CrossRef] [Google Scholar]
  2. I. Su, G.S. Jung, N. Narayanan, M.J. Buehler, Curr. Opin. Biomed. Eng. (2020) https://doi.org/10.1016/j.cobme.2020.01.003 [Google Scholar]
  3. J.H. Lim, Y. Weng, Q.C. Pham, Constr. Build. Mater. 232 (2020) https://doi.org/10.1016/j.conbuildmat.2019.117075 [Google Scholar]
  4. J. Kruger, S. Zeranka, G. van Zijl, Autom. Constr. 106 (2019) https://doi.org/10.1016/j.autcon.2019.102904 [CrossRef] [Google Scholar]
  5. B. Mazhoud, A. Perrot, V. Picandet, D. Rangeard, E. Courteille, Constr. Build. Mater. 214, 458–467 (2019) https://doi.org/10.1016/j.conbuildmat.2019.04.134 [Google Scholar]
  6. Q. Yuan, Z. Li, D. Zhou, T. Huang, H. Huang, D. Jiao, C. Shi, Constr. Build. Mater. 22, 7 (2019) https://doi.org/10.1016/j.conbuildmat.2019.07.326 [Google Scholar]
  7. J.G. Sanjayan, B. Nematollahi, 3D Concrete Printing Technology, 1–11 (2019) https://doi.org/10.1016/b978-0-12-815481-6.00001-4 [Google Scholar]
  8. R.J.M. Wolfs, F.P. Bos, T.A.M. Salet, Cem. Concr. Res. 119, 132–140 (2019) https://doi.org/10.1016/j.cemconres.2019.02.017 [Google Scholar]
  9. J. Katzer, T. Szatkiewicz, Constr. Build. Mater. 210, 157–161 (2019) https://doi.org/10.1016/j.conbuildmat.2019.03.204. [Google Scholar]
  10. B. Furet, P. Poullain, S. Garnier, 3D printing for construction based on a complex wall of polymer-foam and concrete (2019) https://doi.org/10.1016/j.addma.2019.04.002 [Google Scholar]
  11. R.A. Buswell, W.R. Leal de Silva, S.Z. Jones, J. Dirrenberger, 3D printing using concrete extrusion: A roadmap for research (2018) https://doi.org/10.1016/j.cemconres.2018.05.006 [Google Scholar]
  12. J. Xu, L. Ding, L. Cai, L. Zhang, H. Luo, W. Qin, Autom. Constr. 104, 95–106 (2019) https://doi.org/10.1016/j.autcon.2019.03.008 [CrossRef] [Google Scholar]
  13. R. Duballet, O. Baverel, J. Dirrenberger, Autom. Constr. 83, 247–258 (2017) https://doi.org/10.1016/j.autcon.2017.08.018 [CrossRef] [Google Scholar]
  14. V. Mechtcherine, V.N. Nerella, F. Will, M. Näther, J. Otto, M. Krause, Autom. Constr. 107 (2019) https://doi.org/10.1016/j.autcon.2019.102933 [CrossRef] [Google Scholar]
  15. Y. Cui, D. Wang, J. Zhao, D. Li, S. Ng, Y. Rui, J. Build. Eng. 20, 21–29 (2018) https://doi.org/10.1016/j.jobe.2018.06.002 [CrossRef] [Google Scholar]
  16. Z. Malaeb, F. AlSakka, F. Hamzeh, 3D Concrete Printing Technology, 115–136 (2019) https://doi.org/10.1016/b978-0-12-815481-6.00006-3 [CrossRef] [Google Scholar]
  17. Y.W. Tay, Y. Qian, M.J. Tan, Compos. Part B Eng. 174 (2019) https://doi.org/10.1016/j.compositesb.2019.106968 [Google Scholar]
  18. Y. Zhang, Y. Zhang, W. She, L. Yang, G. Liu, Y. Yang, Constr. Build. Mater. 201, 278–285 (2019) [Google Scholar]
  19. B. Panda, G.B. Singh, C. Unluer, M.J. Tan, J. Clean. Prod. 220, 610–619 (2019) https://doi.org/10.1016/j.jclepro.2019.02.185 [Google Scholar]
  20. Y. Zhang, Y. Zhang, G. Liu, Y. Yang, M. Wu, B. Pang, Constr. Build. Mater. 174, 263–271 (2018) https://doi.org/10.1016/j.conbuildmat.2018.04.115 [Google Scholar]
  21. G. De Schutter, K. Lesage, V. Mechtcherine, V.N. Nerella, G. Habert, I. Agusti-Juan, Technical, economic and environmental potentials (2018) https://doi.org/10.1016/j.cemconres.2018.06.001 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.