| Issue |
E3S Web Conf.
Volume 176, 2020
International Scientific and Practical Conference “From Inertia to Develop: Research and Innovation Support to Agriculture” (IDSISA 2020)
|
|
|---|---|---|
| Article Number | 03007 | |
| Number of page(s) | 8 | |
| Section | Modern Scientific Achievements - Into the Practice of Production and Processing of Crop Products | |
| DOI | https://doi.org/10.1051/e3sconf/202017603007 | |
| Published online | 22 June 2020 | |
Analysis of root crop preparation system
1 Tambov State Technical University, 392000, Sovetskaya st., 106, Tambov, Russia
2 Tambov State Tambov State University named after G.R. Derzhavin, 392000, Internatsionalnaya st., 33, Tambov, Russia
* Corresponding author: nemninov@mail.gaps.tstu.ru
In recent years, the technical level of agricultural production has increased significantly, successfully introduced new technological techniques, means of mechanization and automation of production in crop and livestock. At the same time, further progress in this direction is impossible without systematically organized work on the development and implementation of modern automatic control systems for various processes. Works in this direction are based primarily on a detailed study of the properties of various objects of agricultural production, as the basis for the analysis and synthesis of effective automatic control systems is mathematical modeling of real processes and devices. Recently, there has been a transition from the modeling of individual devices to the modeling of complex technological schemes, which is largely due to a significant increase in the complexity and dimension of the problems to be solved. Therefore, this approach allows you to set and solve optimal control problems not only for individual devices, but for entire technological complexes, which in turn will provide a significant economic effect and will be widely used in solving many engineering problems.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.