| Issue |
E3S Web Conf.
Volume 177, 2020
XVIII Scientific Forum “Ural Mining Decade” (UMD 2020)
|
|
|---|---|---|
| Article Number | 03015 | |
| Number of page(s) | 5 | |
| Section | Technical Sciences | |
| DOI | https://doi.org/10.1051/e3sconf/202017703015 | |
| Published online | 08 July 2020 | |
Analysis of the dependence of the stressed state of the tracked track of a career excavator from an angle slope
1 National Research Technological University “MISiS”, 119049, Leninsky Prospekt, 4, Moscow, Russia
2 Ural State Mining University, 620144, Kuibyshev st., 30, Yekaterinburg, Russia
Conducted static research and determined the strength characteristics of the loaded three-dimensional model of the caterpillar track when working at different slope angles. The parameters were calculated in the 3D modeling system “SolidWorks”. As a result of research, it was found that with an increase in the slope angle, the values of the static equivalent stress and strain in the caterpillar track increase in direct proportion, while the value of the safety factor decreases accordingly.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.